Aggarwal Brothers

Bitumen Tapes is cold applied self- adhesive tapes. This tape is very useful to prevent leakages and to fill cracks & joints for various surfaces like Metal, Cement, Asbestos, Fiber, Plastic, Vinyl etc. Bitumen Tape is a simple yet highly effective solution for waterproofing, sealing and insulation

Additional Information:

• Item Code: ST-10
• Production Capacity: 10000 Roll Per Days
• Delivery Time: 2 Days

MULTIPURPOSE SEALING TAPE IS USED FOR WATERPROOFING  OF :
Sheds
Roof
Joints
 Ventilation
Greenhouse
Pipe
Drain System
PEB Structure

Additional Information:

• Delivery Time: One Day
• Packaging Details: 2" - 24 Roll Cartoon

Brief:

• Aluminium Flashing Tapes are cold applied self- adhesive tapes. This tape is very useful to prevent leakages and to fill cracks & joints for various surfaces like Metal, Cement, Asbestos, Fiber, Plastic, Vinyl etc.  Leak-proof Flashing Tape is a simple yet highly effective solution for waterproofing, sealing and insulation.

 Instructions To Use:

•  The surfaces to be sealed must be clean, dry and free of loose rust, scale, dust, talc and dirt. All oil, grease, silicone or other contaminates should be first removed with a suitable solvent/cleaner.

Additional Information:

• Item Code: WATERPROFF

Product Brief:

Butyl Bitumen Based leakproof Flashing Tapes are cold applied self- adhesive tapes with one side bitumen adhesive protected by release film and other side is re-enforced aluminium foil. This tape is very useful to prevent leakages, fill cracks, joints for various surface like Metal, cement, asbestos, fiber, plastic, vinyl etc. Bituminous Flashing Tape is widely used for flashing applications. Leakproof Flashing Tape is a simple yet highly effective solution for waterproofing, sealing and insulation.

Product Features:

It is a convenient, ready-to-use self-adhesive bitumen leakproof flashing tape with a reflective aluminium foil face. It has following features –

•  Excellent adhesion to most substrates without needing a primer
•  Flexible
•  Durable and tear resistance
•  UV and weather resistant
•  Bonds to itself so can be overlapped or repaired
•  Ready to use self-adhesive – simply peel and apply with hand pressure
•  No skilled labour or special equipment required
•  Convenient no-mess application
•  Versatile – can waterproof a variety of applications

Application·

• Roofs - around chimneys and skylights, over joints/ cracks in tiles and roof cladding
• Exterior walls - joints and cracks in asbestos cement sheeting, cracks under masonry ties and anchorages, around wall penetrations (such as water pipes), gutters and downpipes.
• Terraces - at joints between terraces and exterior walls, joints in parapets, roof edges, sides, flashings and joints. Inside the house - leaking pipes, showers etc.
• Use over old paint and waterproof plaster, cement, fibre-cement, bricks, roof tiles and slates, galvanized iron, metal, bituminous treatments, felts, wood and plastic
•  Ideal for box gutters, valley gutters and downpipes.

Bus Roof Leakage Protection Tapes are cold applied self- adhesive tapes. This tape is very useful to prevent leakages and to fill cracks & joints on Bus Roof. Bus Roof Tape is a simple yet highly effective solution for waterproofing, sealing and insulation.

It is ready to use and ideal for sealing and repairing of metal sheeting, water tanks, down pipes and gutters. It is supplied in rolls that are interleaved with a disposable release film.  

Additional Information:

• Item Code: STOPLEAK

“Aluminum Butyl Sealing  Tape”   is  a  High  Quality  Self adhesive Butyl Rubber Base Sealing Tape.

This tape is protected by reinforced Aluminum foil on one side and release liner on other side.

This tape is very useful to prevent leakages and to fill cracks & joints for various surfaces like Metal, Cement, Asbestos, Fiber, Plastic, Vinyl etc.  Leak proof Flashing Tape is a simple yet highly effective solution for waterproofing, sealing and insulation.

Tape Key Features

·        Easily applied with no special equipment 

·        Waterproof,  Oil proof, Good acid and Alkali resistance

·        Chemical properties: solvent-free, non-shrinking, non-toxic

·        Adhesion is strong 

·         Compatible with GI coatings & Cold applied     

·        Can withstand in extreme temperature variations 

 Product Applications:

Ø The surfaces to be sealed must be clean, dry and free of loose rust, scale, dust, talc and dirt. All oil, grease, silicone or other contaminates should be first removed with a suitable solvent/cleaner.

Ø Cut the tape to the necessary length,

Ø Remove the release film and

Ø Press the tape firmly onto the substrate with a suitable pressure roller.

Ø All joint connections have to be overlapped minimum 50 mm.

Product Brief:  

 Bath Seal Tape is twin side adhesive bitumen membrane which comprises of polymerized bitumen sandwiched between a plastic released film on either side.

Typical Application:

Bath seal Tape is mainly used for providing a seamless waterproofing membrane on concrete, wood, metal surfaces. Most ideal for wrapping around the pipes that are inserted through concrete slabs and brick masonry walls in wet areas.

Features:

• Cold applied, self-adhesive and easy to apply.
• Bitumen to bitumen adhesion on the laps provides a seamless layer.
• Excellent adhesion to metals, PVC, wood, cementitious materials etc.
• Improved heat resistance.
• Excellent resistance to chlorides, sulfates, dilute acids and alkalis’.
• Water and vapor proof.

Product Brief:

• Butyl & Bitumen Based Flashing Tapes are cold applied self- adhesive tapes with one side bitumen adhesive protected by release film and other side is re-enforced aluminum foil. This tape is very useful to prevent leakages, fill cracks, joints for various surface like Metal, cement, asbestos, fiber, plastic, vinyl etc. Bituminous Flashing Tape is widely used for flashing applications. Flashing Tape is a simple yet highly effective solution for waterproofing, sealing and insulation.

Product Features:

• It is a convenient, ready-to-use self-adhesive bitumen flashing tape with a reflective aluminum foil face. It has following features –
•  Excellent adhesion to most substrates without needing a primer
• Flexible ,Durable and tear resistance
• Bonds to itself so can be overlapped or repaired
•  Ready to use self-adhesive – simply peel and apply with hand pressure, No skilled labor or special equipment required
• Versatile – can waterproof a variety of applications
•  Compatible with bituminous roof treatments, Easy release silicone backing paper

Application:

•  Roofs - around chimneys and skylights, over joints/ cracks in tiles and roof cladding
•  Exterior walls - joints and cracks in asbestos cement sheeting, cracks under masonry ties and anchorages, around wall penetrations (such as water pipes), gutters and downpipes.
• Terraces - at joints between terraces and exterior walls, joints in parapets, roof edges, sides, flashings and joints. Inside the house - leaking pipes, showers etc.
•  Use over old paint and waterproof plaster, cement, fibre-cement, bricks, roof tiles and slates, galvanized iron, metal, bituminous treatments, felts, wood and plastic
•  Ideal for box gutters, valley gutters and downpipes.

Instructions To Use:

•  Unroll and cut Bitumen Aluminium leakproof Flashing Tape to the required length.
• Peel the backing strip and apply the adhesive side onto the prepared substrate. Ensure that the tape is placed snugly against angular structures.
• Smooth down using a cloth, roller (seam, wallpaper or rubber) or gentle fingertip pressure to prevent air pockets and creases, and to ensure good contact is made. Work from the centre outwards.
• Press firmly along the edges to ensure a tight seal.
• To improve adhesion in cold weather, store the tape at a warm room temperature before use.