|Thickness||1 mm /1.5 mm/ 2 mm|
- Joints & Repair of Telecommunication Cable
-Good Insulation for all solid dielectric cable joints
-Waterproof electrical connection
Ø Bus-Bar Insulation
-Moisture sealing electrical
|Adhesive||Super Strong Rubberized|
|Usage/application||Crack Repairs,Waterproofing,Joint Sealing,Gap Filling|
|Color||Yellow,Black and Which|
|Packaging Size||Single Roll|
“Aluminum Butyl Sealing Tape” is a High Quality Self adhesive Butyl Rubber Base Sealing Tape.
This tape is protected by reinforced Aluminum foil on one side and release liner on other side.
This tape is very useful to prevent leakages and to fill cracks & joints for various surfaces like Metal, Cement, Asbestos, Fiber, Plastic, Vinyl etc. Leak proof Flashing Tape is a simple yet highly effective solution for waterproofing, sealing and insulation.
Butyl tape for Waterproofing and Sealing
Aluminium foil + Rubber adhesive
5 Mtr and 10 mtr
50mm/75 mm/100mm/150 mm
Tape Key Features
· Easily applied with no special equipment
· Waterproof, Oil proof, Good acid and Alkali resistance
· Chemical properties: solvent-free, non-shrinking, non-toxic
· Adhesion is strong
· Compatible with GI coatings & Cold applied
· Can withstand in extreme temperature variations
Ø The surfaces to be sealed must be clean, dry and free of loose rust, scale, dust, talc and dirt. All oil, grease, silicone or other contaminates should be first removed with a suitable solvent/cleaner.
Ø Cut the tape to the necessary length,
Ø Remove the release film and
Ø Press the tape firmly onto the substrate with a suitable pressure roller.
Ø All joint connections have to be overlapped minimum 50 mm.